This topic has been archived. It cannot be replied.
-
工作学习 / 专业技术讨论 / CISCO CATALYST2948G-L3不能启动,哪位有办法,我有一个2948G-L3交换机,启动后直接进入ROMMON状态,不能实现交换,我有CATOS, 但没有办法传到交换机里,因为只有串口可以通信,不能使用TFTP. 使用KERMIT进行传输,仅仅传送几个字节就断了. 哪位大侠知道如何恢复?谢谢!
-tiejun_wang2000(Nike);
2005-11-24
{199}
(#2625635@0)
-
用XMODEM上传你的IOShttp://www.cisco.com/en/US/products/hw/switches/ps663/products_configuration_guide_chapter09186a00801368c2.html#xtocid2778015
-zhoujunok(SouthPark);
2005-11-27
{125}
(#2630790@0)
-
谢谢!我已经采用XMODEM方法将交换机恢复了,谢谢大家帮忙!
-tiejun_wang2000(Nike);
2005-11-28
(#2633044@0)
-
rommon 1> confreg 0x2102
then reboot your router.
-iambigcat(cat);
2005-11-27
(#2630986@0)
-
or: rommon 1>dir flash: then rommon 2> set boot flash:<name of the image file> then rommon 3> reload
-iambigcat(cat);
2005-11-27
(#2631001@0)
-
谢谢!我将采用XMODEM方式恢复,我太清楚XMODEM的操作,需要查一些资料. 第二种方法不行,因为在BOOTFLASH中是CAT4000的FIRMWARE,有人将错误的FIRMWARE传到ROUTER中.
-tiejun_wang2000(Nike);
2005-11-27
(#2631190@0)
-
Oh... why don't you boot from ROM, and change the image file?
-iambigcat(cat);
2005-11-28
(#2632035@0)