This topic has been archived. It cannot be replied.
-
工作学习 / IT技术讨论 / 攒了一台极品pc,但SCSI卡怎莫也不认,adaptec 29320a-r, xp. 那位大虾指点一下p4 3.4ee, p4c800, 4g ram
Adaptec 29320a-r, Seagate 15k 73G.
装XP时,F6 load driver, floppy...但之后总找不到disk. 看起来是driver不对, 但同样的配置两个月前装过, 也是半天不认,后来就突然认到了. 当时没记下来, 这回怎莫也认不出来了.唯一的变化是主板变了p4p800 to p4c800.
对scsi不太熟, 是不是有神莫应该另外注意的,主版设置或其他什莫. 但来回检查了半天, 没发现什莫.
有经验的请一定帮忙.先谢了
-lch2(lch2);
2004-6-26
{384}
(#1780444@0)
-
check SCSI BIOS (CMOS setting) first, if your HDD is ok in that setting, then check your XP driver.
-soimer(北约克);
2004-6-26
(#1780654@0)
-
启动时SCSI卡的BIOS中能找到HD吗？ 另外，这种SCSI卡最好配带64bit/64MHz的PCI或PCI-X的服务器主板，否则，性能只有1/4，鲜花插在!@#$%^...
-agincourt(百灵鸟);
2004-6-26
(#1780731@0)
-
谢谢指教, SCSI BIOS中一切正常, scsi卡id 7, HD id 0, 型号也都对. Adaptec 网站中下的driver也应该不会错, 就那末几个.再说上次也装成了. 真是晕了. 这是driver下载地址,
http://www.adaptec.com/worldwide/support/drivers_by_product.jsp?language=English%2bUS&cat=%2fProduct%2fASC-29320A-R&sess=no&prodkey=ASC-29320A-R
那还有什么要check的, 会不会和p4c MB有关系,可是bios里也没有啊, 其中的raid选项也是on board raid的, 和scsi 卡无关吧 ?
再次谢谢帮忙.
另, 基于p4 (不想用 Xeon) 的入门级server board, 能推荐几种吗?
-lch2(lch2);
2004-6-26
{392}
(#1781024@0)
-
disable on-board HDD controller if there is no disk attached. probabely, windows try to find on-board attached HDD first, then the add-on SCSI. maybe the stupid windows just stuck at the first step.
-soimer(北约克);
2004-6-27
(#1781094@0)
-
Intel: S875WP1-E, SE7210TP1-E; Tyan: S2807, 5112
-agincourt(百灵鸟);
2004-6-27
(#1781186@0)
-
谢谢, disable all 5 hdd device already, except CDROM. same thing.....
下次打算试试百灵鸟推荐的板子, 刚查了一下s875wp1-e才比p4c贵30大元, 回头再比比performance.冒昧的问一句, 看来不是一句两句能说清楚的了,不知那位今天有空,能给我电话支持一把,或 我带着机器登门求教, 实在是没办法了.如果可以实在是不胜感激.
我的手机647-290-6688, 或416-494-5870.
-lch2(lch2);
2004-6-27
{179}
(#1781331@0)
-
where r u? give me private message, maybe I can come to have a look. of course free for such high-end configuration.
-soimer(北约克);
2004-6-27
(#1781366@0)
-
Of course I don't want to pay anything to let u see my treasure. HeHe. I did send u message
-lch2(lch2);
2004-6-27
(#1781423@0)
-
他说的是SCSI卡的BIOS,不是主板的BIOS
-laoyou(老游);
2004-6-27
(#1781346@0)
-
I don't think so. Anyway, everything in SCSI BIOS looks normal and actually by defaults. It does find out Seagate HD and model number.
-lch2(lch2);
2004-6-27
(#1781361@0)
-
Make sure it's not floppy disk or the floppy drive problem.
-laoyou(老游);
2004-6-27
(#1781379@0)
-
试一下用软盘做引导盘，重装系统~~
-tshrj(深白);
2004-6-27
(#1781052@0)
-
我是用cd引导的, 找不着唯一的一块scsi硬盘, 正被困在这呢,谢谢出主意
-lch2(lch2);
2004-6-27
(#1781335@0)
-
did u use ms certified driver from adaptec?
-speed(如风);
2004-6-27
(#1781384@0)
-
Yes, I did. That is for HostRaid
-lch2(lch2);
2004-6-27
(#1781424@0)
-
终于搞定乐。scsi卡换了个插槽。pci slot 3 -> pci slot 5 -> pci slot 2成了我原来用3，后发现asus建议用pci 1,2,5，3,4可能产生冲突。1离显卡太近，用5。但现象和3一样。最后终于无意试了一下2，认了。。。。。。。经查唯一不同应是irq不同。原来一直是irq5,现在是irq10。这应是根本原因吧。
在此谢谢以上各位的回应。
-lch2(lch2);
2004-6-28
{226}
(#1782091@0)
-
congrats...it's certainly very annoying when something like this happens.
-speed(如风);
2004-6-28
(#1782106@0)
-
:-) I don't have to come le ba.
-soimer(北约克);
2004-6-28
(#1782264@0)