This topic has been archived. It cannot be replied.
-
工作学习 / 专业技术讨论 / 请问有没有人做SAN storage的? 有一个brocade switch问题想请教.
-sindy11(独上西楼);
2006-6-23
(#3045367@0)
-
post an dhave a look
-saper(FAN for ORACLE);
2006-6-23
(#3045421@0)
-
谢谢。请大家看看，是这样：switch log 老报：
warning:[FW-1436], 6407,, WARNING, FC_Switch_15, Switch status change contributing factor Marginal ports: 1 marginal ports. (Port(s) 30)
我检查了当前switch的状态实际上一切正常。请问这信息是什么意思？好多switch都报这种信息，但状态都是正常的。搞不懂为什么会报这种信息。
-sindy11(独上西楼);
2006-6-25
{287}
(#3047711@0)
-
Here is the Error Message Reference I pasted for you.Probable Cause: Indicates that the switch status is not in a healthy state. This occurred because the number ports is greater than or equal to the policy set using the switchStatusPolicySet command. faulty when the port value for Link Loss, Synchronization Loss, Signal Loss, Invalid word, error, CRC error, Port state change or Buffer Limited Port is above the high boundary.
Recommedned Action: Replace any faulty or deteriorating SFPs.
Severity: Warning.
-dannyfu(Danny);
2006-6-27
{463}
(#3051335@0)
-
Check the port range setting regarding this parameter...
-saper(FAN for ORACLE);
2006-6-27
(#3051422@0)
-
I think it's less likely that the port is faulty since a couple of switches reported such message not just one.Where should I check the port range setting? in Fabric Watch? I already checked. All switches use default setting. I didn't find something related to the warning message. What does the warning mean?
-sindy11(独上西楼);
2006-6-27
{199}
(#3051704@0)
-
只是好奇。02年的时候，我们用好像是2408，就有这个问题。当时博科中国的工程师也没有解释清楚。后来我离开了也就再也没碰过FC交换机了，您要是找到答案也请公布一下
-guangkuan(破镜重圆);
2006-6-27
(#3052009@0)
-
经过一段时间苦苦搜索，终于找到答案．fabric watch is monitoring every ports. porterrshow command show many increasing errors on some parameters on that port. when those errors reach the thresholds set in the fabirc watch. fabric watch will trigger a event like that in the log.
I also checked with the person that is managing that server which connected to the port. he said he was doing some testing on the server including unplug and plug the cable that connected to the hba.
-sindy11(独上西楼);
2006-7-8
{443}
(#3068578@0)