本文发表在 rolia.net 枫下论坛Optical digital audio cable carries all 5.1 or 6.1 or 7.1 multi channel audio signals. The normal red and white audio cable carries only left and right channel audio signal.
If your receiver/amplifier supports the multi channels surround sound, one single optical digital audio cable cover all channels, you should use the optical digital audio cable.
http://hometheater.about.com/od/hometheaterdoityourself/ig/Home-Theater-Connection-Photo-/Analog-Stereo-Audio-Cables.htm
Analog Stereos cables transfer Left and Right stereo signals from components, such as, a CD player, Cassette Deck, VCR, and other devices to a stereo or surround sound amplifier or receiver. Red is designated for the Right Channel and White is designated for the Left Channel. These colors will correspond to the colors of the receiving end analog stereo connectors on an amplifier or receiver.
http://hometheater.about.com/od/hometheaterdoityourself/ig/Home-Theater-Connection-Photo-/Digital-Optical-Audio-Connect.htm
A digital optical connection is a fiber-optic connection that is used for transfering digital audio signals (such as PCM, Dolby Digital, and DTS) from a source device, such as CD or DVD player and an AV receiver or Surround Sound Preamp/Processor. This connection is also referred to as a TOSLINK connection.更多精彩文章及讨论,请光临枫下论坛 rolia.net
If your receiver/amplifier supports the multi channels surround sound, one single optical digital audio cable cover all channels, you should use the optical digital audio cable.
http://hometheater.about.com/od/hometheaterdoityourself/ig/Home-Theater-Connection-Photo-/Analog-Stereo-Audio-Cables.htm
Analog Stereos cables transfer Left and Right stereo signals from components, such as, a CD player, Cassette Deck, VCR, and other devices to a stereo or surround sound amplifier or receiver. Red is designated for the Right Channel and White is designated for the Left Channel. These colors will correspond to the colors of the receiving end analog stereo connectors on an amplifier or receiver.
http://hometheater.about.com/od/hometheaterdoityourself/ig/Home-Theater-Connection-Photo-/Digital-Optical-Audio-Connect.htm
A digital optical connection is a fiber-optic connection that is used for transfering digital audio signals (such as PCM, Dolby Digital, and DTS) from a source device, such as CD or DVD player and an AV receiver or Surround Sound Preamp/Processor. This connection is also referred to as a TOSLINK connection.更多精彩文章及讨论,请光临枫下论坛 rolia.net