×

Loading...
Ad by
  • 推荐 OXIO 加拿大高速网络,最低月费仅$40. 使用推荐码 RCR37MB 可获得一个月的免费服务
Ad by
  • 推荐 OXIO 加拿大高速网络,最低月费仅$40. 使用推荐码 RCR37MB 可获得一个月的免费服务

show version 内容

本文发表在 rolia.net 枫下论坛Router#show version
Cisco Internetwork Operating System Software
IOS (tm) SOHO91 Software (SOHO91-K9OY6-M), Version 12.3(2)XC, EARLY DEPLOYMENT R
ELEASE SOFTWARE (fc1)
Synched to technology version 12.3(1.6)T
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Thu 25-Sep-03 10:51 by ealyon
Image text-base: 0x800131E8, data-base: 0x80A3FB84

ROM: System Bootstrap, Version 12.2(8r)YN, RELEASE SOFTWARE (fc1)
ROM: SOHO91 Software (SOHO91-K9OY6-M), Version 12.3(2)XC, EARLY DEPLOYMENT RELEA
SE SOFTWARE (fc1)

Router uptime is 6 minutes
System returned to ROM by power-on
System image file is "flash:soho91-k9oy6-mz.123-2.XC.bin"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

CISCO SOHO91 (MPC857DSL) processor (revision 0x300) with 29492K/3276K bytes of m
emory.
Processor board ID AMB074903L0 (3835766437), with hardware revision 0000
CPU rev number 7
Bridging software.
2 Ethernet/IEEE 802.3 interface(s)
128K bytes of non-volatile configuration memory.
6144K bytes of processor board System flash partition 1 (Read/Write)
2048K bytes of processor board System flash partition 2 (Read/Write)
2048K bytes of processor board Web flash (Read/Write)

Configuration register is 0xA103

Router#更多精彩文章及讨论,请光临枫下论坛 rolia.net
Report

Replies, comments and Discussions:

  • 工作学习 / IT技术讨论 / CISCO ROUTER 求助:为什么每次ROUTER 重新启动的时候纵是进入SETUP MODE,NVRAM 中的STARTUP-CONFIG 不起作用了.
    本文发表在 rolia.net 枫下论坛1)每次启动的时候,总提示:
    Would you like to enter the initial configuration dialog? [yes/no]:

    在NVRAM 中有STARTUP-CONFIG 文件.
    startup-confg 文件内容如下:
    Router#sh start
    Using 986 out of 131072 bytes! Cisco Router Web Setup Template
    !
    no service pad
    no service tcp-small-servers
    no service udp-small-servers
    service timestamps debug uptime
    service timestamps log uptime
    service password-encryption
    !
    hostname Router
    !
    !
    ip subnet-zero
    ip domain-lookup
    ip dhcp excluded-address 10.10.10.1
    !
    ip dhcp pool CLIENT
    import all
    lease 0 2
    network 10.10.10.0 255.255.255.0
    default-router 10.10.10.1
    !
    !
    interface Ethernet0
    ip address 10.10.10.1 255.255.255.0
    ip nat inside
    no cdp enable
    hold-queue 32 in
    no shutdown
    !
    interface Ethernet1
    ip address dhcp client-id Ethernet 1
    ip nat outside
    no cdp enable
    no shutdown
    !
    ip classless
    ip http server
    !
    ip nat inside source list 102 interface Ethernet1 overload
    access-list 102 permit ip 10.10.10.0 0.0.0.255 any
    access-list 23 permit 10.10.10.0 0.0.0.255
    !
    !
    line con 0
    exec-timeout 120 0
    stopbits 1
    line vty 0 4
    access-class 23 in
    exec-timeout 120 0
    login local
    !
    end更多精彩文章及讨论,请光临枫下论坛 rolia.net
    • If you post the result of the command "sh ver" after start up the router, maybe you can get some help.
      • show version 内容
        本文发表在 rolia.net 枫下论坛Router#show version
        Cisco Internetwork Operating System Software
        IOS (tm) SOHO91 Software (SOHO91-K9OY6-M), Version 12.3(2)XC, EARLY DEPLOYMENT R
        ELEASE SOFTWARE (fc1)
        Synched to technology version 12.3(1.6)T
        TAC Support: http://www.cisco.com/tac
        Copyright (c) 1986-2003 by cisco Systems, Inc.
        Compiled Thu 25-Sep-03 10:51 by ealyon
        Image text-base: 0x800131E8, data-base: 0x80A3FB84

        ROM: System Bootstrap, Version 12.2(8r)YN, RELEASE SOFTWARE (fc1)
        ROM: SOHO91 Software (SOHO91-K9OY6-M), Version 12.3(2)XC, EARLY DEPLOYMENT RELEA
        SE SOFTWARE (fc1)

        Router uptime is 6 minutes
        System returned to ROM by power-on
        System image file is "flash:soho91-k9oy6-mz.123-2.XC.bin"


        This product contains cryptographic features and is subject to United
        States and local country laws governing import, export, transfer and
        use. Delivery of Cisco cryptographic products does not imply
        third-party authority to import, export, distribute or use encryption.
        Importers, exporters, distributors and users are responsible for
        compliance with U.S. and local country laws. By using this product you
        agree to comply with applicable laws and regulations. If you are unable
        to comply with U.S. and local laws, return this product immediately.

        A summary of U.S. laws governing Cisco cryptographic products may be found at:
        http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

        If you require further assistance please contact us by sending email to
        export@cisco.com.

        CISCO SOHO91 (MPC857DSL) processor (revision 0x300) with 29492K/3276K bytes of m
        emory.
        Processor board ID AMB074903L0 (3835766437), with hardware revision 0000
        CPU rev number 7
        Bridging software.
        2 Ethernet/IEEE 802.3 interface(s)
        128K bytes of non-volatile configuration memory.
        6144K bytes of processor board System flash partition 1 (Read/Write)
        2048K bytes of processor board System flash partition 2 (Read/Write)
        2048K bytes of processor board Web flash (Read/Write)

        Configuration register is 0xA103

        Router#更多精彩文章及讨论,请光临枫下论坛 rolia.net
        • here is the problem
          Configuration register is 0xA103

          put in "no" to skip auto config mode .

          type these comand :

          en

          conf t
          config-register 0x2102
          end
          wr

          reload
          • 谢谢,搞定了.