本文发表在 rolia.net 枫下论坛Initializing C2900XL flash...
flashfs[1]: 18 files, 4 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 3612672
flashfs[1]: Bytes used: 3168768
flashfs[1]: Bytes available: 443904
flashfs[1]: flashfs fsck took 8 seconds.
flashfs[1]: Initialization complete.
...done Initializing C2900XL flash.
C2900XL POST: System Board Test: Passed
C2900XL POST: Daughter Card Test: Passed
C2900XL POST: CPU Buffer Test: Passed
C2900XL POST: CPU Notify RAM Test: Passed
C2900XL POST: CPU Interface Test: Passed
C2900XL POST: Testing Switch Core: Passed
C2900XL POST: Testing Buffer Table: Passed
C2900XL POST: Data Buffer Test: Passed
C2900XL POST: Configuring Switch Parameters: Passed
C2900XL POST: Ethernet Controller Test: Passed
C2900XL POST FAILURE: front-end post: FastEthernet0/2:
C2900XL POST FAILURE: looped-back packet not received
C2900XL POST FAILURE: front-end post: FastEthernet0/6:
C2900XL POST FAILURE: looped-back packet not received
C2900XL POST FAILURE: front-end post: FastEthernet0/9:
C2900XL POST FAILURE: looped-back packet not received
C2900XL POST FAILURE: front-end post: FastEthernet0/10:
C2900XL POST FAILURE: looped-back packet not received
C2900XL POST FAILURE: front-end post: FastEthernet0/11:
C2900XL POST FAILURE: looped-back packet not received
C2900XL POST FAILURE: front-end post: FastEthernet0/12:
C2900XL POST FAILURE: looped-back packet not received
C2900XL POST: MII Test: Passed
cisco WS-C2912-XL (PowerPC403GA) processor (revision 0x11) with 8192K/1024K byte
s of memory.
Processor board ID FAB0406V09P, with hardware revision 0x01
Last reset from power-on
....
C2900XL INIT: Complete
FOUND an unknown transceiver on port 9

00:00:13: %LINK-4-ERROR: is experiencing errorsFOUND an unknown transceiver on
port 10
FOUND an unknown transceiver on port 11
FOUND an unknown transceiver on port 12

00:00:26: %SYS-5-CONFIG: Configured from NVRAM by console
00:00:26: %SYS-5-RESTART: System restarted --更多精彩文章及讨论，请光临枫下论坛 rolia.net